Electrical and Electronic Systems for UAS
ระบบไฟฟ้าและอิเล็กทรอนิกส์สำหรับระบบอากาศยานไร้คนขับ
Course description
power distribution, batteries, motors, electronic speed controllers, wiring, protection circuits, grounding, power management, signal interfaces, electromagnetic interference, and inspection of UAS electrical and electronic systems
Thai description
ระบบจ่ายกำลังไฟฟ้า แบตเตอรี่ มอเตอร์ ตัวควบคุมความเร็วอิเล็กทรอนิกส์ การเดินสายไฟ วงจรป้องกัน ระบบกราวด์ การจัดการพลังงาน อินเทอร์เฟซสัญญาณ การรบกวนทางแม่เหล็กไฟฟ้า และการตรวจสอบระบบไฟฟ้าและอิเล็กทรอนิกส์ของอากาศยานไร้คนขับ
Course learning outcomes (CLO)
| CLO | Outcome | PLO |
|---|---|---|
| CLO1 | Design and calculate UAS power distribution | PLO2 |
| CLO2 | Select and match motors, ESCs, propellers and batteries | PLO2 |
| CLO3 | Handle lithium batteries and electrical systems safely | PLO2PLO6 |
Learning modules
1On-board electrical systems
Weeks 1–3 · 27 hLesson 80 minquiz1 KU
Online (before class) · 15 h
Study the assigned knowledge units in advance, review media and take the module quiz
- UAS power distribution systemsIn development
In class / field · 12 h
Lab or field practice from worksheets with a safety checklist
2Batteries and safety
Weeks 4–6 · 27 hLesson 80 minquiz1 KU
Online (before class) · 15 h
Study the assigned knowledge units in advance, review media and take the module quiz
- Lithium battery safetyIn development
In class / field · 12 h
Lab or field practice from worksheets with a safety checklist
3BLDC motors and ESCs
Weeks 7–9 · 27 hLesson 80 minquiz2 KU
Online (before class) · 15 h
Study the assigned knowledge units in advance, review media and take the module quiz
- BLDC motors, ESCs and propeller matchingIn development
- eCalc xcopterCalcTH
In class / field · 12 h
Lab or field practice from worksheets with a safety checklist
4Propulsion matching
Weeks 10–12 · 27 hLesson 80 minquiz4 KU
Online (before class) · 15 h
Study the assigned knowledge units in advance, review media and take the module quiz
In class / field · 12 h
Lab or field practice from worksheets with a safety checklist
5Wiring, connectors and PCBs
Weeks 13–15 · 27 hLesson 80 minquiz2 KU
Online (before class) · 15 h
Study the assigned knowledge units in advance, review media and take the module quiz
- PCB and wiring-harness designIn development
- KiCadTH
In class / field · 12 h
Lab or field practice from worksheets with a safety checklist
Assessment (draft)
| Labs and worksheets | 35% |
| Module quizzes | 10% |
| Midterm examination | 20% |
| Mini-project or practical exam | 35% |